Semi Automatic Compression Testing Machine Bhutan
Semi Automatic Compression Testing Machine Bhutan
Perfection Comes First With Semi Automatic Compression Testing Machine
Semi Automatic Compression Testing Machine, split, and flexural strengths are determined using machines. These tests are often conducted on materials having a high compressive strength but a low tensile strength, in which the specimen is subjected to increasing compressive pressures until the machine detects failure.
It is feasible to conduct accurate and consistent compression testing on a wide range of specimens when using the Semi-Automatic compression testing instruments provided by Semi Automatic Compression Testing Machine Manufacturers in Bhutan.
These Semi Automatic Compression Testing Machine are the result of several research investigations designed to enhance the machines with cutting-edge technology in order to fulfil the most current standards.
Applications
- At an early age, a young person was subjected to an unconfined compression strength test.
- You may run unconfined flexural and splitting tests with the necessary accessories.
- Compression tests on mortar (cement) should be conducted using the appropriate equipment.
- Core testing in an unrestricted environment
Components
The following are some of the different components of a comprehensive compression test machine:
Compression Frame – These are large, welded frames used for compression. Additionally, the frames house the platens and distance components that enable the system to be changed to meet varied sample size needs.
A pressure rate control valve of the semi-automatic power pack, also known as the motorised power pack, regulates oil delivery to the compression load frame. The Semi Automatic Compression Testing Machine Exporters in Bhutan, may then alter the pacing rate to satisfy the current testing criteria’s needs.
Digital Readout
– The digital readout is designed to be used in combination with the pressure transducer on the load frame. It displays the load and load pressure in real time and has peak hold and multi-point calibration capabilities. Safety Characteristics- By using maximum pressure valves, it is possible to minimise machine overloading.
- Piston travel limiter switch
- On the front and rear, guards made of transparent, long-lasting Plexiglas.
Accessories
An additional flexural frame may be added to the system through the hydraulic control system. 100 kN, 200 kN, and 300 kN are the load ratings, accordingly. To switch between frames, just flip a valve and pick an alternative calibration table from the digital display.
Alternatives to the Current System
Semi Automatic Compression Testing Machine Suppliers in Bhutan, offer a series of contemporary servo-controlled Automatic Power Packs with proportional valves that are readily accessible.