Unconfined Compression Tester Motorize

Model No.: SET-1235

Standards: IS 2720 (PART X) ASTM T 208

Specification:SE-Test India’s Unconfined Compression Tester (Motorized) with model number SET-1235 is manufactured as per the IS 2720 (PART X) ASTM T 208 Standards. It is used to determine the unconfined compression strength of the available soil specimens with the diameter ranging from over 38 mm to 100 mm. A load on a sample is applied gradually by motorized load frame and then the load is measured on a sensitive proving ring which is attached to the respective load frame. With motorized drive, we have a choice of applying three constant rates of stains. This tester meets the testing needs in a much efficient manner. This is not only simple but reliable and economical too. SE-Test India’scomprises a screw operated load frame, cap.5000kg with a gear box and motor drive giving 1.25, 1.5, 2.5mm/min and rates of strain, a pair of cone seating, adaptor for proving ring, and stain dial gauge bracket. SE-Test India’s Supplied with one pair of male/female coning tools for 38mm dia samples but without ring and dial gauge.

Specifications:

The Unconfined Compression Tester (Motorized) from SE-Test Laboratories consists of the following:

• A screw operated load frame with the capacity of 5000k along with the gearbox and a motor drive which gives three different rates of strains ranging 1.25/min, 1.5/min, and 2.5/min.
• A pair of cone seating.
• An adapter for proving ring.
• A stain dial gauge bracket.
• For 38mm dia samples also given a pair of male/female conning tools but without dial gauge and ring.
• Easily operated with 230V.
• A.C. Supply is single phase.