Flash Point Closed Pensky Martens Apparatus

Model No.: SET-2004

When a possible ignition source is mistakenly introduced into a container, pensky martens closed cup flash point apparatus exporters in Delhi, India’ Tester replicates this circumstance by using a closed-cup test configuration that captures any fumes created. Flash point happens to be the lowermost temperature at which vapours from a test part combine with air to form an inflammable mixture, and then "flash" when an ignite source is introduced to the test piece. Choose pensky martens closed cup flash point apparatus manufacturers in Delhi, India, to buy the same for your company.

Pensky-Martens closed cup tester: how to measure flash point

In the ASTM standard method D 93, the basic approach for measuring a flash point making use of the pensky martens closed cup flash point apparatus suppliers in Delhi, India’ Tester is outlined.

The following is a brief description of the testing procedure:

The specimen is heated and stirred at set rates in one of three described methods in a brass test cup of quantified dimensions, occupied to the inner mark along with test example and fitted with a lid of identified dimensions (A, B, or C). Until a flash is seen, an ignition source is placed into the test cup and the stirring is interrupted on a regular basis. Using barometric pressure of 101.3 kPa as the reference, the flash point happens to be described as being the lowest temperature at which the vapours of the test specimen spontaneously ignite when an ignition source used to be applied.