Compression Testing Machine Four Pillar Type Load Frame Hand cum Electrical Operated

Model No.: SET-1136

Standards: IS 516, BS 1881

Specification: The load frame is made up of high quality steel construction with a fixed Upper lead carrying a ball seated platen. 4 pillars are fixed to the base and the top plate of the loading frame. The upper and lower plates are adjusted with the help of a head screw on either side of the pillar. The ram dia of the machine varies from the requirements of the customer. The lower pattern is at the base of the frame above the ram and it is rectangular in shape. Sufficient clearance is provided between the platens to allow the cylindrical or cube moulds to fit in. A spacer is provided to adjust cubes and cylinders. A pressure gauge 20 cm dia. gauge with a maximum load induction pointer is fitted on the top panel and, in turn, is connected to the hydraulic pressure pipe. On the right hand, a console is fitted within which the electrical motor is fitted along with its coupling, which in turn is connected to the pumping unit. A slow/fast loading rate regulator is fixed on the top of the console for adjusting the rate of loading. The machine is duly calibrated and passed after inspecting and analysing it with a compression level indicator, which is provided as a dip stick.

Optional:

1. Ranges: 50 kN to 3000 kN
2. Extra gauges can be attached to the machine (max. 3 nos. ), for better accuracy and results.
3. Electrical connection can either be Single Phase on 220 V A.C., or 3 Phase 440 V A.C.